logo semaths.comPLANTSUPPORTS.NET
avatar for user
Asked by: Payton Spinka
Updated: 25 February 2021 12:24:00 PM

How much does a backyard patio cost?

Installing a patio costs anywhere from $5 to $50 per square foot. Most people pay in the range of $8 to $20 per square foot. Most of your costs come from the materials you choose and the upgrades you opt for. Labor runs anywhere from $5 to $15 per square foot.

Continuing on this line, how much does a 20x20 paver patio cost?

A 20x20 brick paver patio costs $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor runs $6 to $11 per square foot. Get free estimates from masonry contractors near you or view our cost guide below.

With this in view how much does it cost to build a backyard patio?

Cost to Build a Patio
Patio Costs
National average cost$4,958
Average range$3,000 - $7,000
Minimum cost$505
Maximum cost$8,211

In the same vein how much does a 10x10 paver patio cost?

Average Cost to Install Brick Paver Patio by Size
DimensionsTotal Square FeetCost Range
10x10100$800 - $2,500
12x12144$1,150 - $3,600
12x16192$1,550 - $4,800
16x16256*$2,050 - $6,400
Read full answer

Do you have your own answer or clarification?

Related questions and answers

Does decking attract rats?

The simple answer is NO - in isolation, garden decking does not 'attract' rats and there are several easy things you can do to deter rats from your garden. Rats are attracted to readily available sources of food and water – the most common example being the abundance of spilled nuts or seeds from bird feeders.

Do I need a sub-base for patio?

Although not always required for patio projects, sub-bases are vital when laying block paving in order to prevent settlement. Various materials can be used as a sub-base and your selection can depend on the particular project being carried out. The type of material required will depend upon the type of paving laid.

How do you prepare ground for pavers?

Before you begin laying pavers, prepare the ground. Ensure you have a root and rubble free compatible sand sub-base of at least 50mm thick. The sub-base should be roughly levelled and damped down before tamping down firmly with a hand or mechanical compactor.

What adds more value to a home a deck or patio?

Patios are generally less expensive than decks, but the ROI on a new deck addition runs greater than one on a patio. However, both additions can offer a great experience depending on what you're looking for.

Is it better to have a deck or patio?

In short, patios are usually cheaper than decks.
For instance, since a patio is placed directly on the ground, you'll want to choose a space that is level. Patios may not be the best choice for uneven ground because the cost to create a level foundation can double or triple the cost of the actual addition.

Which is cheaper a wood deck or concrete patio?

Overall, a concrete patio will generally be cheaper to install compared to a deck. While your specific house and yard set-up may determine which is cheaper for your individual needs, a wood deck is likely to have a better return on investment compared to a concrete patio.

How deep do I dig for a patio?

Dig a depth of around 150mm across the whole area, making sure the soil is evenly compacted. Then tip in the sub-base, raking it into a consistent depth of 100mm. Make sure it's smooth, flat and firm.

Can I use regular sand between pavers?

You can use All-Purpose/Leveling/Paver sand or Polymeric sand, which permanently adheres the paving stones together. A hand tamp should be used to vibrate the sand further into the joints, but be careful not to tamp too hard because you crack your stones. Never use a plate compacter on your paving stones.

Is it easier to build a deck or patio?

Installation of a deck is more difficult than a patio and is best done by professionals. Patios are easier to install but require extensive preparation of the ground surface where they'll be laid. They are best installed in areas that are relatively flat and even as the patio is installed directly on the ground.

How many inches of sand do I need for pavers?

Plan on spreading about 1 inch of sand beneath the pavers, says Western Interlock. You'll also use it to fill the gaps between them. The sand should be spread over a 4- to 12-inch layer of crushed stone, which has been tamped into place.

What is the least expensive way to build a patio?

Check out the cheapest patio material here to find some great ideas for your green space!
  1. Concrete. Concrete is a simple, inexpensive material for building your patio.
  2. Gravel. Gravel is one of the most inexpensive patio material options.
  3. Pavers. Nothing quite beats the elegance of a natural stone patio.
  4. Brick.

Should patio go right up to house?

For ultimate convenience, your patio will be right next to your house in an area that's as private as possible. “Thoughtful siting will increase the use,” says Pedersen. “Let's face it, people can be lazy. If you have to go down two flights of stairs to have your coffee, you're not going to do it.”

Is it cheaper to pour concrete or use pavers?

As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.

Can you put decking over a patio?

Even if your patio is in terrible shape, you can deck over it. This project raises the level of your patio by 2-1/2 to 3-1/2 in. (depending on the thickness of your decking and whether or not you put spacers under the sleepers). So any door thresholds adjoining the patio must be at least that far above the concrete.

Is there a cheaper alternative to flagstone?

Stamped concrete is an inexpensive alternative to flagstone for a patio. When it comes to choosing a surface material for a patio, homeowners are often drawn to flagstone because of its elegant appearance. Its expensive price tag, however, also deters many people from selecting it, especially for use on larger patios.

How long does it take to lay a patio?

An 8 square metre patio with a simple design should take approximately 2 days for two people. This includes marking out the area, digging down to the required depth or removing existing paving or decking, laying the sub-base foundation, mixing and applying the mortar, laying the slabs and finally filling in the joints.

What is the cheapest way to make a patio?

Concrete is one of the cheapest and most popular materials that can be used to build a hard-surface patio. The aggregates of concrete can be stone, gravel, sand, or shells, which are mixed with water to form a paste that dries into a hard surface when left to settle.

Is a patio a good investment?

That said, it's estimated that patios can recover up to $6,525 of the cost to build, which is an ROI of just over 100%. A better option for most homeowners, however, would be to refinish or repair an existing patio, as repair estimates average around $1,300. This can provide an ROI of nearly 500%.

What is the best base for patio pavers?

The Interlocking Concrete Pavement Institute recommends washed concrete sand as the best base sand for pavers. Concrete sand, also known as bedding sand, is coarse and doesn't trap excess moisture beneath the paver surface.

Do patios increase home value?

Outdoor rooms
A dining area, dry laid patio, a patch of gravel, a covered patio or an above-grade deck: According to SmartMoney.com, a landscaped patio raises the value of your home by 12.4 percent. Today's best-selling improvement is a backyard terrace that abuts the family room.

Is decking cheaper than patio?

Key Points. Decking is more affordable, quicker to install but doesn't last very long. Paving slabs can be pricier, take longer to install but require little-to-no maintenance and will last for a long time.

Can you lay pavers directly on dirt?

While a permanent installation requires excavating soil and a compacted base of gravel and sand to ensure a long-lasting, level patio, you may only need the space for a season or two. A temporary installation of patio pavers on dirt may suffice until you're ready to install the hardscape in a long-range landscape plan.

How much does it cost for a 12x12 concrete slab?

How much does a 12x12 concrete slab cost? The average cost to pour a 12x12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.

What is the difference between paver sand and paver base?

A walk or patio requires a 4-inch layer of compacted paver base, while a driveway needs a 12-inch layer. Some paver manufacturers recommend a 1/2-inch layer of sand when installing their products. Smooth and compact the soil with a hand or plate compactor before adding the paver base.

Can you lay a patio without cement?

Adding sharp sand
If you're not confident about making a concrete bed, don't worry – sharp sand is easier, and works just as well. It holds just as firm as cement and still allows water to escape beneath.

How many inches of gravel do you need for pavers?

Normally you want a base layer of gravel about 4-inches deep. Four inches is one-third of a foot, so multiply the square footage by one-third to find the cubic feet of gravel you need.

How much should I spend on a patio?

On average, you'll spend $10 to $20 per square foot total for a patio install. For materials, expect to pay anywhere from $5 to $35 per square foot with labor adding $5 to $15 per square foot. Upgrading or adding custom patios and pathways to your home increases its curb appeal and might increase its value.